Find the best courses

Supervisor - S123

27th May 2026

7:45am to 4:00pm

Emerald, Emerald

2-day program. A QLD mining legislation requirement for supervisory roles.

Supervisor - S123

Collaborative Planning and Value Stream Mapping

27th May 2026

9:00am to 5:00pm

Birmingham, Birmingham

Two workshops in a day to learn how to collaboratively plan project activities, and to identify steps that increase flow and eliminate waste.

Lean Skills Development

Learning From Disasters - workshop component

27th May 2026

7:45am to 4:30pm

Emerald, Emerald

Developed by SIMTARS (RTO 45647) on behalf of RSHQ, the primary objective of this course is to learn from disasters, rather than learning about disasters. The course focusses on learning from failure patterns and trends in past disasters.

Learning From Disasters

Combo S123 & G2

27th May 2026

7:45am to 4:00pm

Emerald, Emerald

3-day program. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Std11 Surf & UG combo

27th May 2026

7:45am to 4:00pm

Emerald, Emerald

3 day program. No experience at working in underground coal. Includes practical assessment of CABA changeover in simulated roadway.

Standard 11 training

Std11 Surface

27th May 2026

7:45am to 4:00pm

Emerald, Emerald

2 day program for those new to the Queensland mining industry. Resource sector workers may be eligible for refresher (metalliferous, LNG, quarries, WA or NSW mining)

Standard 11 training

Standardised Work / Lean Construction & Waste

28th May 2026

9:00am to 5:30pm

Birmingham, Birmingham

Two workshops in a day to learn how to perform tasks consistently, and to identify & reduce waste.

Lean Skills Development

BMA Broadmeadow site specific underground induction

28th May 2026

7:45am to 4:00pm

Moranbah & BRM, Moranbah

2 day induction for Underground mineworkers at BMA Broadmeadow only

BMA Broadmeadow UG

G2 - Cert IV Risk

29th May 2026

7:45am to 4:00pm

Emerald, Emerald

1 day program. A QLD mining requirement for certain roles. Must supply current SoA for S123 when booking.

Cert IV Risk - G2

Std11 Underground add on

29th May 2026

7:45am to 4:00pm

Emerald, Emerald

1 day add on program for those new to QLD underground coal. Includes practical assessment of CABA changeover in simulated roadway. Must supply current Std11 Surface certificate (6 units) as part of booking process.

Standard 11 training

Course in Firearms and Weapons Safety (approved for firearms licensing in Queensland)

30th May 2026

7:45am to 4:00pm

Emerald, Emerald

Pre-requisite by the QLD Police Weapons Licensing for acquiring a firearms licence.

Firearms safety Cat AB,H,C,D

Refresher Supervisor - S123

2nd June 2026

7:45am to 12:00pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for supervisory roles.

Supervisor - S123

Refresher Combo S123 & G2

2nd June 2026

7:45am to 4:30pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Refresher G2 - Cert IV Risk

2nd June 2026

12:45pm to 4:30pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for certain roles. Must supply previous SoA for G2 when booking.

Cert IV Risk - G2

Learning From Disasters - workshop component

3rd June 2026

7:45am to 4:30pm

Emerald, Emerald

Developed by SIMTARS (RTO 45647) on behalf of RSHQ, the primary objective of this course is to learn from disasters, rather than learning about disasters. The course focusses on learning from failure patterns and trends in past disasters.

Learning From Disasters

Supervisor - S123

3rd June 2026

7:45am to 4:00pm

Emerald, Emerald

2-day program. A QLD mining legislation requirement for supervisory roles.

Supervisor - S123

Combo S123 & G2

3rd June 2026

7:45am to 4:00pm

Emerald, Emerald

3-day program. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Std11 Surf & UG combo

3rd June 2026

7:45am to 4:00pm

Emerald, Emerald

3 day program. No experience at working in underground coal. Includes practical assessment of CABA changeover in simulated roadway.

Standard 11 training

Std11 Surface

3rd June 2026

7:45am to 4:00pm

Emerald, Emerald

2 day program for those new to the Queensland mining industry. Resource sector workers may be eligible for refresher (metalliferous, LNG, quarries, WA or NSW mining)

Standard 11 training

BMA Broadmeadow site specific underground induction

4th June 2026

7:45am to 4:00pm

Moranbah & BRM, Moranbah

2 day induction for Underground mineworkers at BMA Broadmeadow only

BMA Broadmeadow UG

Refresher Std11 Surface

4th June 2026

7:45am to 11:30am

Emerald, Emerald

5-year refresher for experienced mineworkers. Other resource sector workers may be eligible (metalliferous, lng, quarries)

Standard 11 training

Refresher Std11 Surf & UG

4th June 2026

7:45am to 4:00pm

Emerald, Emerald

5-year refresher for experienced underground mineworkers. Includes practical assessment of CABA changeover in simulated roadway.

Standard 11 training

Refresher Std11 UG add on

4th June 2026

12:15pm to 4:00pm

Emerald, Emerald

For experienced underground coalmine workers. Includes practical assessment of CABA changeover in simulated roadway. Must supply current Std11 Surface certificate (6 units) and a copy of previous ERR203E unit as part of booking process.

Standard 11 training

G2 - Cert IV Risk

5th June 2026

7:45am to 4:00pm

Emerald, Emerald

1 day program. A QLD mining requirement for certain roles. Must supply current SoA for S123 when booking.

Cert IV Risk - G2

Std11 Underground add on

5th June 2026

7:45am to 4:00pm

Emerald, Emerald

1 day add on program for those new to QLD underground coal. Includes practical assessment of CABA changeover in simulated roadway. Must supply current Std11 Surface certificate (6 units) as part of booking process.

Standard 11 training

Std11 Surf & UG combo

8th June 2026

7:45am to 4:00pm

Emerald, Emerald

3 day program. No experience at working in underground coal. Includes practical assessment of CABA changeover in simulated roadway.

Standard 11 training

Problem Solving & Cont. Improvement - LCI-UK Standard (Part Two)

8th June 2026

10:00am to 1:00pm

Venue: Online Course

Workshop to review progress and complete the LCI-UK Standard. CITB Grant available upon completion.

LCI-UK Standard / Part 2

Std11 Surface

8th June 2026

7:45am to 4:00pm

Emerald, Emerald

2 day program for those new to the Queensland mining industry. Resource sector workers may be eligible for refresher (metalliferous, LNG, quarries, WA or NSW mining)

Standard 11 training

Refresher Supervisor - S123

9th June 2026

7:45am to 12:00pm

Moranbah, Moranbah

5-year refresher. A QLD mining legislative requirement for supervisory roles.

Supervisor - S123

Refresher Combo S123 & G2

9th June 2026

7:45am to 4:30pm

Moranbah, Moranbah

5-year refresher. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Refresher G2 - Cert IV Risk

9th June 2026

12:45pm to 4:30pm

Moranbah, Moranbah

5-year refresher. A QLD mining legislative requirement for certain roles. Must supply previous SoA for G2 when booking.

Cert IV Risk - G2

Std11 Underground add on

10th June 2026

7:45am to 4:00pm

Emerald, Emerald

1 day add on program for those new to QLD underground coal. Includes practical assessment of CABA changeover in simulated roadway. Must supply current Std11 Surface certificate (6 units) as part of booking process.

Standard 11 training

Supervisor - S123

10th June 2026

7:45am to 4:00pm

Moranbah, Moranbah

2-day program. A QLD mining legislation requirement for supervisory roles.

Supervisor - S123

Combo S123 & G2

10th June 2026

7:45am to 4:00pm

Moranbah, Moranbah

3-day program. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Std11 Surf & UG combo

10th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

3 day program. No experience at working in underground coal. Includes practical assessment of CABA changeover in simulated roadway.

Standard 11 training

Std11 Surface

10th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

2 day program for those new to the Queensland mining industry. Resource sector workers may be eligible for refresher (metalliferous, LNG, quarries, WA or NSW mining)

Standard 11 training

BMA Broadmeadow site specific underground induction

11th June 2026

7:45am to 4:00pm

Moranbah & BRM, Moranbah

2 day induction for Underground mineworkers at BMA Broadmeadow only

BMA Broadmeadow UG

Refresher Std11 Surface

11th June 2026

7:45am to 11:30am

Emerald, Emerald

5-year refresher for experienced mineworkers. Other resource sector workers may be eligible (metalliferous, lng, quarries)

Standard 11 training

Refresher Std11 Surf & UG

11th June 2026

7:45am to 4:00pm

Emerald, Emerald

5-year refresher for experienced underground mineworkers. Includes practical assessment of CABA changeover in simulated roadway.

Standard 11 training

Refresher Std11 UG add on

11th June 2026

12:15pm to 4:00pm

Emerald, Emerald

For experienced underground coalmine workers. Includes practical assessment of CABA changeover in simulated roadway. Must supply current Std11 Surface certificate (6 units) and a copy of previous ERR203E unit as part of booking process.

Standard 11 training

Std11 Underground add on

12th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

1 day add on program for those new to QLD underground coal. Includes practical assessment of CABA changeover in simulated roadway. Must supply current Std11 Surface certificate (6 units) as part of booking process.

Standard 11 training

G2 - Cert IV Risk

12th June 2026

7:45am to 4:00pm

Moranbah, Moranbah

1 day program. A QLD mining requirement for certain roles. Must supply current SoA for S123 when booking.

Cert IV Risk - G2

5S Workplace Organisation - LCI-UK Standard (Part Two)

12th June 2026

9:00am to 12:30pm

Venue: Online Course

Workshop to review progress and complete the LCI-UK Standard. CITB Grant available upon completion.

LCI-UK Standard / Part 2

Visual Management - LCI-UK Standard (Part Two)

12th June 2026

9:00am to 12:30pm

Venue: Online Course

Follow-on workshop to review progress, embed learning & complete the LCI-UK Standard. CITB Grant available on completion.

LCI-UK Standard / Part 2

Learning From Disasters - workshop component

16th June 2026

7:45am to 4:30pm

TAFE Eagle Farm, Eagle Farm

Developed by SIMTARS (RTO 45647) on behalf of RSHQ, the primary objective of this course is to learn from disasters, rather than learning about disasters. The course focusses on learning from failure patterns and trends in past disasters.

Learning From Disasters

CODESYS Training - Level 1

16th June 2026

9:00am to 12:00pm

Venue: Online Course

Kickstart your automation journey with our Level 1 CODESYS Online Training. Learn the fundamentals of PLC programming, basic project setup, and practical control system applications in a hands-on, beginner-friendly environment.

#AutomationTraining #BPXTraining #CODESYS

Refresher Supervisor - S123

16th June 2026

7:45am to 12:00pm

Moranbah, Moranbah

5-year refresher. A QLD mining legislative requirement for supervisory roles.

Supervisor - S123

Refresher Combo S123 & G2

16th June 2026

7:45am to 4:30pm

Moranbah, Moranbah

5-year refresher. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Refresher G2 - Cert IV Risk

16th June 2026

12:45pm to 4:30pm

Moranbah, Moranbah

5-year refresher. A QLD mining legislative requirement for certain roles. Must supply previous SoA for G2 when booking.

Cert IV Risk - G2

Supervisor - S123

17th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

2-day program. A QLD mining legislation requirement for supervisory roles.

Supervisor - S123

Supervisor - S123

17th June 2026

7:45am to 4:00pm

Moranbah, Moranbah

2-day program. A QLD mining legislation requirement for supervisory roles.

Supervisor - S123

Learning From Disasters - workshop component

17th June 2026

7:45am to 4:30pm

Moranbah, Moranbah

Developed by SIMTARS (RTO 45647) on behalf of RSHQ, the primary objective of this course is to learn from disasters, rather than learning about disasters. The course focusses on learning from failure patterns and trends in past disasters.

Learning From Disasters

Combo S123 & G2

17th June 2026

7:45am to 4:00pm

Moranbah, Moranbah

3-day program. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Combo S123 & G2

17th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

3-day program. A QLD mining legislative requirement for supervisory roles.

S123 & G2

CODESYS Training - Level 2

18th June 2026

9:00am to 12:00pm

Venue: Online Course

Build on the basics by creating structured, modular programs using POUs, functions, and function blocks. Develop reusable code and gain practical skills for professional PLC programming.

#AutomationTraining #BPXTraining #CODESYS

BMA Broadmeadow site specific underground induction

18th June 2026

7:45am to 4:00pm

Moranbah & BRM, Moranbah

2 day induction for Underground mineworkers at BMA Broadmeadow only

BMA Broadmeadow UG

G2 - Cert IV Risk

19th June 2026

7:45am to 4:00pm

Moranbah, Moranbah

1 day program. A QLD mining requirement for certain roles. Must supply current SoA for S123 when booking.

Cert IV Risk - G2

G2 - Cert IV Risk

19th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

1 day program. A QLD mining requirement for certain roles. Must supply current SoA for S123 when booking.

Cert IV Risk - G2

Course in Firearms and Weapons Safety (approved for firearms licensing in Queensland)

20th June 2026

7:45am to 4:00pm

Emerald, Emerald

Pre-requisite by the QLD Police Weapons Licensing for acquiring a firearms licence.

Firearms safety Cat AB,H,C,D

Collaborative Planning - LCI-UK Standard (Part Two)

22nd June 2026

9:30am to 12:30pm

Venue: Online Course

Follow-on workshop to review progress, embed learning & complete the LCI-UK Standard. CITB Grant available on completion.

LCI-UK Standard / Part 2

Value Stream Mapping - LCI-UK Standard (Part Two)

22nd June 2026

2:00pm to 5:00pm

Venue: Online Course

Follow-on workshop to review progress, embed learning & complete the LCI-UK Standard. CITB Grant available on completion.

LCI-UK Standard / Part 2

Learning From Disasters - workshop component

23rd June 2026

7:45am to 4:30pm

TAFE Eagle Farm, Eagle Farm

Developed by SIMTARS (RTO 45647) on behalf of RSHQ, the primary objective of this course is to learn from disasters, rather than learning about disasters. The course focusses on learning from failure patterns and trends in past disasters.

Learning From Disasters

CODESYS Training - Level 3

23rd June 2026

9:00am to 12:00pm

Venue: Online Course

Explore simulation and visualization tools in CODESYS. Test and validate programs in a virtual environment and create interactive visual projects for monitoring and optimization.

#AutomationTraining #BPXTraining #CODESYS

Refresher Supervisor - S123

23rd June 2026

7:45am to 12:00pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for supervisory roles.

Supervisor - S123

Refresher Combo S123 & G2

23rd June 2026

7:45am to 4:30pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Refresher G2 - Cert IV Risk

23rd June 2026

12:45pm to 4:30pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for certain roles. Must supply previous SoA for G2 when booking.

Cert IV Risk - G2

Supervisor - S123

24th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

2-day program. A QLD mining legislation requirement for supervisory roles.

Supervisor - S123

Supervisor - S123

24th June 2026

7:45am to 4:00pm

Emerald, Emerald

2-day program. A QLD mining legislation requirement for supervisory roles.

Supervisor - S123

Combo S123 & G2

24th June 2026

7:45am to 4:00pm

Emerald, Emerald

3-day program. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Combo S123 & G2

24th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

3-day program. A QLD mining legislative requirement for supervisory roles.

S123 & G2

CODESYS Training - Level 4

25th June 2026

9:00am to 12:00pm

Venue: Online Course

Explore simulation and visualization tools in CODESYS. Test and validate programs in a virtual environment and create interactive visual projects for monitoring and optimization.

#AutomationTraining #BPXTraining #CODESYS

BMA Broadmeadow site specific underground induction

25th June 2026

7:45am to 4:00pm

Moranbah & BRM, Moranbah

2 day induction for Underground mineworkers at BMA Broadmeadow only

BMA Broadmeadow UG

G2 - Cert IV Risk

26th June 2026

7:45am to 4:00pm

Emerald, Emerald

1 day program. A QLD mining requirement for certain roles. Must supply current SoA for S123 when booking.

Cert IV Risk - G2

G2 - Cert IV Risk

26th June 2026

7:45am to 4:00pm

TAFE Eagle Farm, Eagle Farm

1 day program. A QLD mining requirement for certain roles. Must supply current SoA for S123 when booking.

Cert IV Risk - G2

Learning From Disasters - workshop component

29th June 2026

7:45am to 4:30pm

Emerald, Emerald

Developed by SIMTARS (RTO 45647) on behalf of RSHQ, the primary objective of this course is to learn from disasters, rather than learning about disasters. The course focusses on learning from failure patterns and trends in past disasters.

Learning From Disasters

Refresher Supervisor - S123

30th June 2026

7:45am to 12:00pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for supervisory roles.

Supervisor - S123

Refresher Combo S123 & G2

30th June 2026

7:45am to 4:30pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for supervisory roles.

S123 & G2

Refresher G2 - Cert IV Risk

30th June 2026

12:45pm to 4:30pm

Emerald, Emerald

5-year refresher. A QLD mining legislative requirement for certain roles. Must supply previous SoA for G2 when booking.

Cert IV Risk - G2

An Introduction to Lean / Problem Solving & Continuous Improvement

1st July 2026

9:00am to 5:30pm

Birmingham, Birmingham

Full day combining two key workshops. CITB Grant available on completion of Introduction to Lean.

Lean Beginner

Visual Management / 5S Workplace Organisation

2nd July 2026

9:15am to 5:30pm

Birmingham, Birmingham

Two workshops in a day to help you create a leaner workplace and manage projects through effective visual management.

Lean Skills Development

Level 3 Paediatric First Aid (RQF) - Blended Learning (Online + 1-day)

3rd July 2026

9:30am to 4:30pm

Venture House, Boston

This two-day course satisfies the guidelines and criteria as laid down by the Early Years Foundation Stage (EYFS) and Ofsted.

First Aid and Medical

#PaediatricFirstAid

CODESYS Training - Level 5

7th July 2026

9:00am to 12:00pm

Venue: Online Course

Learn the fundamentals of Structured Text (ST) in CODESYS, including branching with If and Case statements. Gain hands-on experience writing efficient, professional PLC programs.

#AutomationTraining #BPXTraining #CODESYS

Collaborative Planning and Value Stream Mapping

8th July 2026

9:00am to 5:00pm

London, London

Two workshops in a day to learn how to collaboratively plan project activities, and to identify steps that increase flow and eliminate waste.

Lean Skills Development

Standardised Work / Lean Construction & Waste

9th July 2026

9:00am to 5:30pm

London, London

Two workshops in a day to learn how to perform tasks consistently, and to identify & reduce waste.

Lean Skills Development

CODESYS Training - Level 6

9th July 2026

9:00am to 12:00pm

Venue: Online Course

Master state machines, task management, and loops in Structured Text. Build more sophisticated, automated control systems in CODESYS.

#AutomationTraining #BPXTraining #CODESYS

CODESYS Training - Level 7

14th July 2026

9:00am to 12:00pm

Venue: Online Course

Learn to handle arrays, pointers, and array loops in CODESYS Structured Text for efficient data manipulation and automation logic.

#AutomationTraining #BPXTraining #CODESYS

5S Workplace Organisation - LCI-UK Standard (Part Two)

17th July 2026

1:30pm to 5:00pm

Venue: Online Course

Workshop to review progress and complete the LCI-UK Standard. CITB Grant available upon completion.

LCI-UK Standard / Part 2

Visual Management - LCI-UK Standard (Part Two)

17th July 2026

9:00am to 12:30pm

Venue: Online Course

Follow-on workshop to review progress, embed learning & complete the LCI-UK Standard. CITB Grant available on completion.

LCI-UK Standard / Part 2

Value Stream Mapping - LCI-UK Standard (Part Two)

27th July 2026

2:00pm to 5:00pm

Venue: Online Course

Follow-on workshop to review progress, embed learning & complete the LCI-UK Standard. CITB Grant available on completion.

LCI-UK Standard / Part 2

Basic HMI Modbus VSD Control Training

8th September 2026

Venue: Online Course

Learn to control an FR-E800 VSD via PLC/HMI using Modbus in this 3-hour online session. Configure GX Works3 projects, map drive registers to HMI screens, commission drives, and troubleshoot faults—practical skills for automation engineers and technicians.

Mitsubishi Electric

#MitsubishiPLC #iQF #FX5PLC #FRE800 #VSDControl #HMI #Modbus #AutomationTraining #IndustrialAutomation #BPXTraining #PLCProgramming #HMIDesign #IndustrialControls #LearnAutomation #ControlsEngineering

Microsoft Power BI - Working with DAX (Intermediate)

Flexible start date.

Venue: Flexible

This is an intermediate level course that is more focused on DAX, the Power BI query/expression language. A good grasp of DAX is essential if you want to extend your data analysis skills and get maximum value from measures in Power BI.

Microsoft Power BI

#powerbi #dax #data #businessintelligence #datadashboards #training

How to Build High Impact Student Performance Dashboards with Power BI

Flexible start date.

Venue: Flexible

This course is designed for people who want to produce effective Power BI reports for an education sector audience. The course assumes some Power BI Desktop knowledge experience - attendees should know who to import tables of data from MS Excel and then use them to build simple reports.

Microsoft Power BI - Education

#powerbi #dataineducation ##powerbischools #dashboards #businessintelligence

Microsoft Power BI for Educators (Beginners)

Flexible start date.

Venue: Flexible

This is a version of our beginner’s Power BI course that we have adapted for people working in education - schools, colleges, training providers and universities. The activities are education focused. It is designed for people who have little or no Power BI experience.

Microsoft Power BI - Education

#powerbi #dataineducation ##powerbischools #dashboards #businessintelligence #education

Microsoft Power BI for Educators (Intermediate)

Flexible start date.

Venue: Flexible

This is our intermediate level Power BI course. It is designed for people who work in education and have some experience with MS Power BI Desktop. It builds on our Microsoft Power BI for Educators (Beginners) course.

Microsoft Power BI - Education

#powerbi #dataineducation ##powerbischools #dashboards #businessintelligence #education

Microsoft Power BI Next Steps (Intermediate)

Flexible start date.

Venue: Flexible

This is our intermediate level Power BI course. It is designed for people who have some experience with MS Power BI Desktop. It builds on our Get Started with Power BI (Beginners) course. Content includes working with multiple data sources, creating measures with DAX and sharing reports.

Microsoft Power BI

#powerbi #intermediate #data #businessintelligence #bi

RIIMEX406D Apply and monitor mine transport system and production equipment

Flexible start date.

Self-paced studies, self-paced studies

Experience mineworkers - are you ready to progress in your career? This is typically the first unit to commence your studies toward becoming an ERZ Controller in Queensland.

Statutory studies - ERZ

#deputies

Get Started with Power BI (Beginners)

Flexible start date.

Venue: Flexible

This is our beginner’s Power BI course. The course is designed around Microsoft Power BI Desktop. It is an ideal course for someone with little or no Power BI experience. Content includes importing data, building reports with Power BI Desktop and sharing reports with colleagues.

Microsoft Power BI

#powerbi #dataanalysis

Bespoke Training Courses

Flexible start date.

Venue: Flexible

If you can't find the right course listed, let us know! We’ll create a bespoke training program tailored to your team’s needs, using our expertise in leading automation technologies like Schneider Electric, Mitsubishi Electric, and more.

Bespoke

#PLC #Networking #MitsubishiElectric #SchneiderElectric #VSD #Inverters

SMC - Introduction to Pneumatics and Electro Pneumatics

Flexible start date.

Venue: Flexible

Gain a solid foundation in pneumatics and electro-pneumatics. Learn about pneumatic components, circuit diagrams, and troubleshooting techniques. Develop practical skills through hands-on exercises.

SMC

#Pneumatics #ElectroPneumatics #PneumaticSystems #SMCTraining #SMC

Pilz – City & Guilds Assured 4-Day Machinery Safety Course

Flexible start date.

8:30am to 5:00pm

Venue: Flexible

Gain a City & Guilds Assured Machinery Safety Certificate in 4 days. Learn risk assessment, control systems, wiring, and CE marking principles. This CPD-accredited course, delivered by Pilz, includes theory, hands-on exercises, and certification, ideal for engineers and managers.

Pilz

#Pilz #Safety #Certified

SICK - Virtual Classroom: Online Functional Safety Training and SISTEMA

Flexible start date.

10:00am to 12:00pm

Venue: Online Course

Learn the fundamentals of Machine Functional Safety and SISTEMA software in this interactive online course. Gain practical knowledge of BS EN ISO 13849-1, hazard identification, and safety validation. Delivered over six sessions, this training is ideal for engineers, machine builders, and end users

SICK

#SICK

Visual Management / 5S Workplace Organisation

Flexible start date.

9:15am to 5:30pm

Birmingham, Birmingham

Two workshops in a day to help you create a leaner workplace and manage projects through effective visual management.

Lean Skills Development